Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

Module 6 (PROBD) – Day Course

1‑day CPC course delivered in the Finglas Training Centre. Course duration 08:15 – 16:00.

Who Should Attend:

Drivers who completed their Truck or Bus Driving Test after September 2009 and have completed Initial CPC Training and received their Driver Qualification Card (DQC).
If you have not completed Initial CPC, please do not book this course. Refer to www.theorytest.ie or call 1890 606 106.

Duration:

08:15 – 16:00 (1 day)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Requirements:

Driver Qualification Card (DQC).
Must have completed Initial CPC Training.
Training language: English.

Cancellation Policy:

Cancellations must be received 48 hours before the course start time.
Failure to cancel within 48 hours will result in loss of the course fee.
To cancel, contact the Customer Service Team on 01 864 1790 or info@ism.ie.

SOLAS Safe Pass Training – 1 Day Course
Accredited Safe Pass training designed for private individuals and business clients who require SOLAS certification to work on construction sites in Ireland.

Who Should Attend:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On-site security personnel
• Contractors
• On-site drivers
• On-site delivery drivers (e.g., concrete trucks)

Duration:
1 Day (8:00am – 4:00pm)

Location:
ISM Training Centre (Tallaght) 6B Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24

Requirements:

• 1 passport-sized photograph
• Valid photo identification
• Irish PPS number
• Proof of PPS number (Social Welfare Card or payslip)
• Training language: English (participants must have strong spoken and written English)

Course Content:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment
• Safe use of hand tools, equipment, and machinery
• Safe use of vehicles
• Manual handling awareness
• Health and hygiene

Certification:
SOLAS Safe Pass Card

Module 1 (CVEDT) – Day Course

1‑day CPC course delivered in the Tallaght Training Centre. Course duration 08:15 – 16:00.

Who Should Attend:

Drivers who completed their Truck or Bus Driving Test after September 2009 and have completed Initial CPC Training and received their Driver Qualification Card (DQC).
If you have not completed Initial CPC, please do not proceed with booking. Refer to www.theorytest.ie or call 1890 606 106.

Duration:

08:15 – 16:00 (1 day)

Location:

ISM Training Centre (Tallaght).
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24.

Requirements:

Driver Qualification Card (DQC).
Must have completed Initial CPC Training.
Training language: English.

Cancellation Policy:

To guarantee places for all trainees, ISM require 48 hours' notice of cancellation.

Forklift Training – Refresher

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Reach Truck)

Refresher forklift operator course covering the safe operation of reach trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced reach truck operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous reach truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Power Pallet Truck)

Refresher forklift operator course covering the safe operation of power pallet trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous power pallet truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Counterbalance)

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift drivers who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Manual Handling – 2 Hour Course (Finglas)

Accredited 2‑hour manual handling training designed to provide learners with the essential knowledge and practical skills required for safe load handling.

Who Should Attend:

Individuals seeking certification in the safe handling of loads.

Duration:

10:00 – 12:00 (2 hours)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Course Content:

Legislation
Structure of the spine
Injury to the spine
Fitness and wellbeing
Ergonomics
Safe handling of loads (Practical)

Certification:

ISM Certificate of Completion
Valid for 3 years

IPAF 3a & 3b Training (Scissor Lift & Telescopic Boom)

IPAF‑accredited training for the safe operation of Mobile Elevating Work Platforms (MEWPs), covering both Scissor Lift (3a) and Telescopic Boom (3b) categories.
Delivered over 1 day. Training and certification included.
Cost: €220.00 (includes certification)

Who Should Attend:

Operators who require internationally recognised IPAF training and certification in:

• Mobile Vertical (3a) Scissor Lift
• Mobile Boom (3b) Telescopic Boom

Ideal for experienced MEWP operators seeking globally recognised certification and an official IPAF PAL Card, demonstrating competency to international safety standards.

What You Will Learn:

Training combines classroom instruction and practical assessment, covering:

• Understanding MEWP controls and safety features
• Safe use of harnesses and attachment to approved anchor points
• Emergency lowering procedures
• Safe operation of Scissor Lifts (vertical access)
• Safe operation of Telescopic Booms (extended outreach access)
• Identifying workplace hazards and safe working practices
• Compliance with relevant Health & Safety legislation
• Pre‑use inspections and PPE requirements
• Correct storage of equipment
• Fall protection, suspension trauma awareness, and rescue planning

Harness awareness and correct usage are included and suitable for both new and experienced operators.

Duration:

1 day
Maximum group size: 4 trainees

Location:

ISM IPAF Training Centre (Tallaght)
Unit 6B, Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English

Trainers:

All instructors are IPAF‑accredited and qualified to deliver 3a & 3b MEWP operator training.

Certification:

IPAF 3a & 3b Operator Certificate and PAL Card
(Recognised internationally to IPAF and ISO 18878 standards)

Module 4 (RPDTI) – Day Course

1‑day CPC course delivered in the Finglas Training Centre. Course duration 08:15 – 16:00.

Who Should Attend:

Drivers who completed their Truck or Bus Driving Test after September 2009 and have completed Initial CPC Training and received their Driver Qualification Card (DQC).
If you have not completed Initial CPC, please do not book this course. Refer to www.theorytest.ie or call 1890 606 106.

Duration:

08:15 – 16:00 (1 day)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Requirements:

Driver Qualification Card (DQC).
Must have completed Initial CPC Training.
Training language: English.

Cancellation Policy:

Cancellations must be received 48 hours before the course start time.
Failure to cancel within 48 hours will result in loss of the course fee.
To cancel, contact the Customer Service Team on 01 864 1790 or info@ism.ie.

Module 2 (MRMET) – Day Course

1‑day CPC course delivered in the Tallaght Training Centre. Course duration 08:15 – 16:00.

Who Should Attend:

Drivers who completed their Truck or Bus Driving Test after September 2009 and have completed Initial CPC Training and received their Driver Qualification Card (DQC).
If you have not completed Initial CPC, please do not proceed with booking. Refer to www.theorytest.ie or call 1890 606 106.

Duration:

08:15 – 16:00 (1 day)

Location:

ISM Training Centre (Tallaght).
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24.

Requirements:

Driver Qualification Card (DQC).
Must have completed Initial CPC Training.
Training language: English.

Cancellation Policy:

To guarantee places for all trainees, ISM require 48 hours' notice of cancellation.

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of reach trucks and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of reach trucks and power pallet trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher

Refresher forklift operator course covering counterbalance, reach truck, and power pallet truck operation.
Delivered over 3 consecutive days. Training and certification included.

Who Should Attend:

Previously certified and experienced forklift operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (3 days)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

SOLAS Safe Pass Training – 1 Day Course
Accredited Safe Pass training designed for private individuals and business clients who require SOLAS certification to work on construction sites in Ireland.

Who Should Attend:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On-site security personnel
• Contractors
• On-site drivers
• On-site delivery drivers (e.g., concrete trucks)

Duration:
1 Day (8:00am – 4:00pm)

Location:
ISM Training Centre (Tallaght) 6B Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24

Requirements:

• 1 passport-sized photograph
• Valid photo identification
• Irish PPS number
• Proof of PPS number (Social Welfare Card or payslip)
• Training language: English (participants must have strong spoken and written English)

Course Content:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment
• Safe use of hand tools, equipment, and machinery
• Safe use of vehicles
• Manual handling awareness
• Health and hygiene

Certification:
SOLAS Safe Pass Card

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

Forklift Training – Refresher

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Reach Truck)

Refresher forklift operator course covering the safe operation of reach trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced reach truck operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous reach truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Power Pallet Truck)

Refresher forklift operator course covering the safe operation of power pallet trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous power pallet truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Manual Handling – 2 Hour Course (Finglas)

Accredited 2‑hour manual handling training designed to provide learners with the essential knowledge and practical skills required for safe load handling.

Who Should Attend:

Individuals seeking certification in the safe handling of loads.

Duration:

10:00 – 12:00 (2 hours)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Course Content:

Legislation
Structure of the spine
Injury to the spine
Fitness and wellbeing
Ergonomics
Safe handling of loads (Practical)

Certification:

ISM Certificate of Completion
Valid for 3 years

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

ADR Tanker – 5 Days (Finglas)

This 5‑day course provides drivers with the required training to obtain their ADR Tanker certification. Training covers the regulations and safety procedures for transporting dangerous goods by road throughout Ireland and the EU.

Who Should Attend

Drivers who:

• Require an ADR Training Certificate
• Operate vehicles transporting dangerous goods by road within Ireland or the EU

The course includes training on the transport of dangerous goods in packages, IBCs, bulk, and tanks.

Duration

Start Time: 08:30
Finish Time: 16:30
Duration: 5 Days

Location

22 Jamestown Business Centre
Jamestown Road
Finglas, Dublin 11

Certification

Training supports obtaining the ADR Tanker component of the ADR Training Certificate.

Cancellation Policy

Cancellations must be received 48 hours before the course start time.
Late cancellations result in the loss of the course fee.
To cancel, contact the Customer Service Team at 01 864 1790 or email info@ism.ie.

ADR Initial Basic – 3 Days (Finglas)

This 3‑day course provides drivers with the required training to obtain their ADR Training Certificate and covers the regulations and safety procedures for transporting dangerous goods by road.

Who Should Attend

Drivers who:

• Require an ADR Training Certificate
• Operate vehicles transporting dangerous goods by road in Ireland or the EU
  Training covers carriage of dangerous goods in packages, IBCs, bulk, and tanks.

Duration

Start Time: 08:30
Finish Time: 16:30
Duration: 3 Days

Location

ISM Training & Recruitment Services
Jamestown Business Centre
Finglas, Dublin 11

Certification

Training supports obtaining the ADR Initial Basic component of the ADR Training Certificate.

Cancellation Policy

Cancellations must be received 48 hours before the course start time.
Late cancellations result in loss of course fee.
To cancel, contact the Customer Service Team at 01 864 1790 or email info@ism.ie.

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of reach trucks and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of reach trucks and power pallet trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of counterbalance and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of forklift trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of reach trucks and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of forklift trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

SOLAS Safe Pass Training – 1 Day Course
Accredited Safe Pass training designed for private individuals and business clients who require SOLAS certification to work on construction sites in Ireland.

Who Should Attend:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On-site security personnel
• Contractors
• On-site drivers
• On-site delivery drivers (e.g., concrete trucks)

Duration:
1 Day (8:00am – 4:00pm)

Location:
ISM Training Centre (Tallaght) 6B Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24

Requirements:

• 1 passport-sized photograph
• Valid photo identification
• Irish PPS number
• Proof of PPS number (Social Welfare Card or payslip)
• Training language: English (participants must have strong spoken and written English)

Course Content:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment
• Safe use of hand tools, equipment, and machinery
• Safe use of vehicles
• Manual handling awareness
• Health and hygiene

Certification:
SOLAS Safe Pass Card

WHO SHOULD ATTEND: 

If you completed your Truck or Bus Driving Test AFTER SEPTEMBER 2009, did you complete your Initial CPC Training and receive your Driver Qualification Card? 

If not, please do not proceed to book and refer to www.theorytest.ie or call 1890 606 106

CANCELLATION POLICY: To guarantee places for all trainees, all cancellations must be received 48 hours in advance of course start time. Failure to cancel within a 48 hour period will result in the loss of course fee. To cancel, please contact the Customer Service Team on 01 8641790 or email info@ism.ie.

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

Module 1 (CVEDT) – Day Course

1‑day CPC course delivered in the Tallaght Training Centre. Course duration 08:15 – 16:00.

Who Should Attend:

Drivers who completed their Truck or Bus Driving Test after September 2009 and have completed Initial CPC Training and received their Driver Qualification Card (DQC).
If you have not completed Initial CPC, please do not proceed with booking. Refer to www.theorytest.ie or call 1890 606 106.

Duration:

08:15 – 16:00 (1 day)

Location:

ISM Training Centre (Tallaght).
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24.

Requirements:

Driver Qualification Card (DQC).
Must have completed Initial CPC Training.
Training language: English.

Cancellation Policy:

To guarantee places for all trainees, ISM require 48 hours' notice of cancellation.

SOLAS Safe Pass Training – 1 Day Course
Accredited Safe Pass training designed for private individuals and business clients who require SOLAS certification to work on construction sites in Ireland.

Who Should Attend:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On-site security personnel
• Contractors
• On-site drivers
• On-site delivery drivers (e.g., concrete trucks)

Duration:
1 Day (8:00am – 4:00pm)

Location:
ISM Training Centre (Tallaght) 6B Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24

Requirements:

• 1 passport-sized photograph
• Valid photo identification
• Irish PPS number
• Proof of PPS number (Social Welfare Card or payslip)
• Training language: English (participants must have strong spoken and written English)

Course Content:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment
• Safe use of hand tools, equipment, and machinery
• Safe use of vehicles
• Manual handling awareness
• Health and hygiene

Certification:
SOLAS Safe Pass Card

Forklift Training – Refresher

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Reach Truck)

Refresher forklift operator course covering the safe operation of reach trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced reach truck operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous reach truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Power Pallet Truck)

Refresher forklift operator course covering the safe operation of power pallet trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous power pallet truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Counterbalance)

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift drivers who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Manual Handling – 2 Hour Course (Finglas)

Accredited 2‑hour manual handling training designed to provide learners with the essential knowledge and practical skills required for safe load handling.

Who Should Attend:

Individuals seeking certification in the safe handling of loads.

Duration:

10:00 – 12:00 (2 hours)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Course Content:

Legislation
Structure of the spine
Injury to the spine
Fitness and wellbeing
Ergonomics
Safe handling of loads (Practical)

Certification:

ISM Certificate of Completion
Valid for 3 years

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

IPAF 3a & 3b Training (Scissor Lift & Telescopic Boom)

IPAF‑accredited training for the safe operation of Mobile Elevating Work Platforms (MEWPs), covering both Scissor Lift (3a) and Telescopic Boom (3b) categories.
Delivered over 1 day. Training and certification included.
Cost: €220.00 (includes certification)

Who Should Attend:

Operators who require internationally recognised IPAF training and certification in:

• Mobile Vertical (3a) Scissor Lift
• Mobile Boom (3b) Telescopic Boom

Ideal for experienced MEWP operators seeking globally recognised certification and an official IPAF PAL Card, demonstrating competency to international safety standards.

What You Will Learn:

Training combines classroom instruction and practical assessment, covering:

• Understanding MEWP controls and safety features
• Safe use of harnesses and attachment to approved anchor points
• Emergency lowering procedures
• Safe operation of Scissor Lifts (vertical access)
• Safe operation of Telescopic Booms (extended outreach access)
• Identifying workplace hazards and safe working practices
• Compliance with relevant Health & Safety legislation
• Pre‑use inspections and PPE requirements
• Correct storage of equipment
• Fall protection, suspension trauma awareness, and rescue planning

Harness awareness and correct usage are included and suitable for both new and experienced operators.

Duration:

1 day
Maximum group size: 4 trainees

Location:

ISM IPAF Training Centre (Tallaght)
Unit 6B, Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English

Trainers:

All instructors are IPAF‑accredited and qualified to deliver 3a & 3b MEWP operator training.

Certification:

IPAF 3a & 3b Operator Certificate and PAL Card
(Recognised internationally to IPAF and ISO 18878 standards)

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of reach trucks and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of reach trucks and power pallet trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of counterbalance and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of forklift trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Beginner / Novice

Beginner‑level forklift operator course covering the safe operation of reach trucks and power pallet trucks.
Delivered over 5 consecutive days. Training and certification included.

Who Should Attend:

Individuals wishing to attain certification in the safe operation of forklift trucks.

Duration:

9:00am – 4:00pm (5 days)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Safe Pass Training

One‑day SOLAS‑accredited Safe Pass course designed to ensure workers in the construction industry have the required safety awareness to prevent accidents and promote a safe working environment.

Who Should Attend:

This course is suitable for:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On‑site security personnel
• Contractors’ drivers on‑site
• Delivery drivers on‑site (e.g. concrete truck drivers)

Duration:

1 day

Location:

ISM Training Centre (Finglas)
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11

Prerequisites:

All participants must provide the following:

• One passport‑sized photograph
• Valid photographic ID (passport, driving licence, social services card, etc.)
• Irish PPS Number
• Proof of PPS Number (Social Welfare card or payslip showing PPS number)
• Good level of written and spoken English (course delivered in English only)

Important:
A valid Irish PPS Number is mandatory to attend Safe Pass training.
Participants who cannot provide all required documentation will be refused entry.

Course Content Includes:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment (PPE)
• Safe use of vehicles
• Manual handling
• Working with hand tools, power tools and machinery
• Health and hygiene

Certification:

SOLAS Safe Pass Card
Issued to participants who successfully complete the full‑day training.

SOLAS Safe Pass Training – 1 Day Course
Accredited Safe Pass training designed for private individuals and business clients who require SOLAS certification to work on construction sites in Ireland.

Who Should Attend:

• Craft workers
• Apprentices
• General construction workers
• Working chargehands
• On-site security personnel
• Contractors
• On-site drivers
• On-site delivery drivers (e.g., concrete trucks)

Duration:
1 Day (8:00am – 4:00pm)

Location:
ISM Training Centre (Tallaght) 6B Broomhill Business Complex
Broomhill Road, Tallaght, Dublin 24

Requirements:

• 1 passport-sized photograph
• Valid photo identification
• Irish PPS number
• Proof of PPS number (Social Welfare Card or payslip)
• Training language: English (participants must have strong spoken and written English)

Course Content:

• Duties and responsibilities at work
• Noise and vibration
• Accident reporting and prevention
• Promoting a safety culture
• Working at heights
• Excavations and confined spaces
• Working with electricity and overhead services
• Personal protective equipment
• Safe use of hand tools, equipment, and machinery
• Safe use of vehicles
• Manual handling awareness
• Health and hygiene

Certification:
SOLAS Safe Pass Card

Forklift Training – Refresher

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Reach Truck)

Refresher forklift operator course covering the safe operation of reach trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced reach truck operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous reach truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have concerns about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Power Pallet Truck)

Refresher forklift operator course covering the safe operation of power pallet trucks.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced operators who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Finglas)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11, D11 X853

Requirements:

• Valid previous power pallet truck certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Forklift Training – Refresher (Counterbalance)

Refresher forklift operator course covering the safe operation of counterbalance forklifts.
Delivered over 1 day. Training and certification included.

Who Should Attend:

Previously certified and experienced counterbalance forklift drivers who require refresher training to maintain recognised certification.

Duration:

9:00am – 4:00pm (1 day)

Location:

ISM Training Centre (Tallaght)
Purpose-built warehouse facility with counterbalance, reach and power pallet trucks.
6B Broomhill Business Complex, Broomhill Road, Tallaght, Dublin 24, D24 PNH4

Requirements:

• Valid previous counterbalance forklift certification
• Minimum age 18
• Health declaration required
• Hi-vis vest required
• Closed-toe footwear required (safety boots recommended)
• Training language: English
• Participants must display the required standard to obtain certification
  (If you have any doubts about your ability to complete the refresher course, please contact the office on 01‑8641790.)

Trainers:

All trainers are fully qualified and RTITB approved.

Certification:

ISM Lift Truck Operator Refresher Certificate of Training
All ISM Forklift & Warehouse Training is accredited and approved by RTITB, SOLAS, and the RSA.

Notes:

This course supports compliance with the Safety, Health and Welfare at Work Act 2005, helping to:

• Improve operator skills and techniques
• Reduce damage to goods and equipment
• Prevent workplace accidents

Manual Handling – 2 Hour Course (Finglas)

Accredited 2‑hour manual handling training designed to provide learners with the essential knowledge and practical skills required for safe load handling.

Who Should Attend:

Individuals seeking certification in the safe handling of loads.

Duration:

10:00 – 12:00 (2 hours)

Location:

ISM Training Centre (Finglas).
22 Jamestown Business Park, Jamestown Road, Finglas, Dublin 11.

Course Content:

Legislation
Structure of the spine
Injury to the spine
Fitness and wellbeing
Ergonomics
Safe handling of loads (Practical)